The Quality Hobby Shop

Estes flying scale model rocket kit #0651
der Red Max Flying Model Rocket Kit

The Estes der Red Max was one of Estes most popular rockets a couple decades ago. Its zany markings and comical Red Max character made it fun to build and fly at rocket sites across the US. Todays version is identical in size, color and markings as the original, upgraded to laser cut balsa fins and a new exlcusive der Red Max parachute. Features original graphics on Water Slide Decals! The der Red Max flies over 500 feet high using standard Estes engines (sold separately), so you can fly it over and over again. It returns back to earth on a pre-assembled 18 inch parachute.

Specs:
Plastic nose cone
Laser cut balsa fins
18inch parachute recovery.
Length: 16.25inch
Diameter: 1.64inch
Weight.: 2.4oz.

Recommended Motors: B6-2, B6-4, C6-5, C6-7

Estes flying scale model rocket kit #802
Quark Mini-engine Rocket

Mini-engine powered mighty mite. With incredibly simple construction (only seven parts), a little spray paint and decals, and whoosh - out-a-sight flights to 700 feet! Safe feather-weight recovery for this micro rocket!

Specifications:
Length: 5.2" (13.2cm) Diameter: 0.54" (13.7mm) Weight: 0.1oz (3g)
Max Altitude: 700ft (213m) Recovery: Featherweight
Fins: Balsa Engines: 1/2A3-4T, A3-4T, A10-3T

note: no engines are included with this kit.

Estes flying scale model rocket kit #803
Bandito high flying sport rocket

The Estes Bandito is a high flying sport rocket. A great model kit to use for scout, club or school projects. With its pre-colored plastics, slotted body tube and integrated motor mount, the Bandito is easily assembled in an hour. The Estes Bandito flying model rocket requires minor assembly and no painting! It is recovered with a 12 inch pre-assembled parachute. Assembly required. Glue and launch supplies ? not included in the Estes Bandito kit.

The high-flying Bandito sport rocket can be easily assembled in under an hour. Includes pre-colored slotted body tube and plastic parts. It screams into the sky on mini-engines.

Length: 11.2 in. (28.4 cm)
Diameter: 0.736 in. (18.7 mm)
Weight: 0.60 oz. (17 g)
Recovery: 12 in. (30 cm) Parachute
Fins: Plastic molded
Maximum Altitude: 600 ft. (183 m)
Recommended Engines: 1/4A3-3T, 1/2A3-2T, A3-4T, A10-3T

note: no engines are included with this kit.

Estes flying scale model rocket kit #804
Firehawk E2X Model Rocket

Firehawk is an E2X® Mini-Engine Flying Model Rocket from Estes®.
Suitable for Ages 10 & Older with Adult Supervision.

A high-flying sport rocket.
Great for scouts, clubs or schools...build & launch in 1 hour!
No painting needed...silver chrome colored body tube.
Red plastic fins and nose cone.
Flies to 550 feet on Estes® mini-engine power!
Parachute recovery (12").
Length: 11.2" (28.4cm)
Diameter: .736" (18.7mm)
Weight: .65oz (18.4g)
Altitude: 550ft (168m)

Requires assembly, Glue
Engines (1/4A3-3T, 1/2A3-2T, A3-4T, or A10-3T)
Launch System
Launch Supplies

Estes flying scale model rocket kit #806
Firestreak SST E2X

An Estes original!
The first ever snap-together rocket!
Put this rocket together in minutes and you're ready to launch!
Recommended Motors:
1/2A3-2T, A3-4T (1st flight), A10-3T

Diameter: 22.5mm / 3/4 in
Length: 260mm / 10 in
Weight: 32.3g

Estes flying scale model rocket kit #810
Swift 220 Mini Engine Rocket

This is the 220 Swift Flying Model Rocket from Estes®. Recommended for Ages 10 & Older with Adult Supervision.
Sleek, high speed design! Lightweight. Tumble recovery. Flies to 750 feet (260 meters).

Requires assembly, Glue, Paint
Engines (1/4A3-3T, 1/2A3-4T, A3-4T, or A10-3T) Launch System Launch Supplies
Length: 4.5" (11.4cm)
Diameter: 0.54" (14mm)
Weight: 0.094oz (2.7g)

note: no engines are included

Estes flying scale model rocket kit #886
Gnome mini motor Kit

The Estes Gnome is a mini motor powered high flyer! Pre-colored silver body tube makes this rocket easy to track! Flies with economical Estes mini motors! Flights to 800 feet! Plastic nose cone and one piece plastic fin unit and no painting make for easy assembly. Streamer recovery is used on the Estes Gnome.

Length: 10.25in
Diameter: 0.544in
Weight: 0.42oz
Recommended Motors: 1/2A3-2T, 1/2A3-4T, A3-4T, A10-3T

note: no engines are included with this item

Estes flying scale model rocket kit #1225
Alpha Easy to build model rocket

For over 30 years, the Alpha has been the first choice for millions of rocket modelers. Easy to build, rugged performance, parachute recovery - the perfect rocket to get you started! For over 30 years, the Alpha has been the first choice for millions of rocket modelers. Easy to build, rugged performance, parachute recovery - the perfect rocket to get you started!

Length: 12.3" (31.2 cm)
Diameter: 0.98" (24.9 mm)
Weight: 0.8 oz (23 g)
Recovery: 12" (30 cm) parachute
Fins: Die cut balsa
Maximum Altitude: 1000 ft (305 m)
Recommended Engines: A8-3, B4-4, B6-4, B6-6, C6-5, C6-7

note: no engines are included with this kit.

Estes flying scale model rocket kit #1250
Interceptor Flying Model Rocket

Classic Bring Back of a World Renown Model Rocket!

Updated with New Parts & Added Details!
Precision Laser Cut Balsa Parts!
5 Color Decals for Extreme Detail!
Flies to 525 ft. (160 m) on Estes C Engines!
Over 2 Feet (610mm) Tall!

Introducing a classic remake of the ESTES Interceptor one of the most popular model rockets of all time!
The new Interceptor retains the intergalactic cruiser look it had decades ago, but with new and improved features such as: laser cut precision balsa parts, highly detailed blow molded nose cone and 5 color decal sheets that provide spectacular results!

Over 2 feet (610mm) in length, this rocket flies great on Estes B & C engines to heights over 500 Feet (152m). An 18” (457mm) parachute deploys at apogee for risk free recovery of this model rocket masterpiece. No doubt that this truly classic design will be the talk of any launch site!

Assembly required
Glue and launch supplies – not included
note: no engines are included

Estes flying scale model rocket kit #1256
Alpha III E2X model rocket

The Alpha III is An Almost Ready to Fly Model Rocket from Estes' E2X Series.
Kit Suitable for Ages 10 and Older. Adult Supervision for Those Under 12.

A perfect beginner's rocket.
Almost ready to fly!
Brightly molded one-piece orange plastic fin unit and nose cone.
Black cardboard body tube.
Capability of flying over 1100 feet (335 meters), depending on the
engine you select.
Parachute recovery.
Fly again and again!
Bright self-adhesive decorative decals.
Estes' full 1 year warranty.
Detailed illustrated assembly and launch instructions.

Requires assembly, Igniters, Wadding, Launch System
Recommended Engines:
1/2 A6-2, A8-3 (First Flight); B4-4, B6-4, B6-6, C6-5, C6-7.
Length: 12.25" (31.1cm)
Diameter: .976" (24.8mm)
Weight: 1.2oz (34g)
Recovery: 12" (30cm)

note: no engines are included with this item

Estes flying scale model rocket kit #1260
Sky Writer PENCIL Rocket Kit E2X

This fun rocket looks like a wooden pencil. The Sky Writer comes with colored body tubes, fins and nose cone, so assembly is quick and easy.

Please note: no engines are included with this item

Estes flying scale model rocket kit #1261
Baby Bertha model Rocket

Great Beginner Kit!
This rocket is a miniature version of one of the most popular kits of all time, the Big Bertha. A smaller version of the burly, big and beautiful Big Bertha. Rising from slow, realistic lift-offs, this true classic soars to 575Ft (175m).

Baby Bertha Rocket Specs:
Length: 12.75 in (32.4cm)
Dia: .98 in (41.6mm)
Wt: 1.6 oz (45.3g)
Recovery: 12 in (30cm)
Parachute Fins: Die cut balsa
Max Altitude: 575ft (175m)
Recommended Engines: A8-3, B4-4, B6-4, C6-5
Please note: no engines are included with this item

Estes flying scale model rocket kit #1262
Cosmic Cobra model rocket

The Cosmic Cobra features a two-way recovery system. The booster returns to earth using a 12 in. (30 cm) parachute, while the nose cone helicopters down gently using rotor blades.
Length: 19.5 in. (49.5 cm)
Diameter: 1.35 in. (34.3 mm)
Weight: 3.1 oz. (88 g)
Recovery: Booster - 12 in. (30 cm) Parachute; Nose Cone - Helicopter
Fins: Two piece plastic
Maximum Altitude: 530 ft. (162 m) Recommended Engines: B4-2, B6-2, B6-4, C6-3, C6-5

note: no engines are included with this kit.

Estes flying scale model rocket kit #1292
Wizard model Rocket

No tricks here - the Wizard is an easy-to-build, high-performance kit. Featuring die cut balsa fins and self-adhesive decals, the Wizard is recovered via a bright streamer for soft, safe landings. A great first or second kit that promises real excitement and fun!

Specifications:
Length: 12" (30.5cm) Diameter: 0.74" (18.8mm) Weight: 0.8oz (22g)
Max Altitude: 1500ft (457m) Recovery: Streamer
Fins: Balsa Engines: A8-3, B4-4, B6-4, B6-6, C6-5, C6-7

Please note: no engines are included with this item

Estes flying scale model rocket kit #1295
Mean Machine 6 1/2 ft. tall Flying Rocket

The Mean Machine is back and now it's meaner than ever! Now you can fly it on Estes E engines and soar over 900 feet (274m) high!

Length: 79.0" (200.6 cm)
Diameter: 1.64" (41.7 mm)
Weight: 5.8 oz (164 g)
Recovery: 24" (61 cm) parachute
Fins: Laser Cut Fins
Recommended Engines: D12-3, D12-5, E9-4, E9-6

please note: no engines included

Estes flying scale model rocket kit #1300
Blue Ninja Rocket kit E2X Series

Estes E2X Rockets
Almost Ready to Fly
Plastic fins and nose cones
No painting or special tools required!
These kits require minor assembly and can be constructed in one or two hours.
Come complete with out-of-this-world, colorful, self-adhesive decals, and pre-colored parts.
Assembly Kit suitable for ages 10 and older.
Adult supervision for those under 12.
(D & E Engines)

please note: no engines included

Estes flying scale model rocket kit #1301
Stormcaster Rocket

Flies up to 900 feet (274m) depending on chosen engine. Designed to fly off the Estes C11 engine, and will also fly on Estes D-series engines.
18" parachute recovery.
White cardboard body tubes.
White plastic nose cone and fins.
Self-adhesive decals.
Detailed illustrated assembly and launch instructions.

Requires Assembly, Paint, Glue, Igniters & Igniter, Plugs, Wadding, Launch System,
Recommended Engines: C11-3, D12-5
Length: 30.25" (76.8cm)
Diameter: 1.64" (41.6mm)
Weight: 2.9 oz. (80.8g)
Skill Level 1, Suitable for ages 10 and older, adult supervision for those under 12.

Please note: no engines are included with this item.

Estes flying scale model rocket kit #1302
CC EXPRESS Model Rocket

Specifications:
Skill Level: 2
Length: 28.4"
Diameter: 1.3"
Nose Cone: Ogive
Weight (without motor): 2.7 oz.
Fins: 4 fins on each stage
Stages: 2
Motor Mount 24mm to 24mm
Recovery System: 18" Parachute

RECOMMENDED MOTORS
Single Stage
C11-5, D12-5, E15-7, E30-7
Booster/Upper
C11-0/C11-5, C11-0/D12-7, D12-0/C11-7,
D12-0/D12-7
please note: no engines included

Estes flying scale model rocket kit #1302
CC EXPRESS Model Rocket

RECOMMENDED MOTORS
Single Stage
C11-5, D12-5, E15-7, E30-7
Booster/Upper
C11-0/C11-5, C11-0/D12-7, D12-0/C11-7,
D12-0/D12-7
please note: no engines included

Estes flying model rocket kit #1350
Interceptor E

The new Interceptor E-powered upscale. Introducing the ESTES E-powered version of the world-renowned Interceptor model rocket!

Standing nearly 39 inches tall, this Skill Level 2 rocket features laser cut precision balsa parts, a slotted body tube for extra secure wing & fin mounting, a detailed blow molded nose cone and 3 huge 5-color decal sheets that will finish this model in award winning décor!

Skill Level 2
Length: 39.0 inches
Diameter: 2.0 inches
Wingspan: 11.25 inches
Recovery System: 24-inch Nylon Parachute
Recommended Engines: E9-4

Requires: Assembly, Model Rocket Engines, Wadding, Launch Pad, Launch Controller (not included)

Estes-Cox has re-released one of the all-time favorites of rocketeers everywhere, the futuristic Interceptor, and added an upscaled version called the Interceptor E, designed to be flown on E motors. The Interceptor has been one of the most requested, longest awaited re-release.

Estes flying scale model rocket kit #1381
Yankee Rocket kit

A rocket with All-American performance - screams to 1400 foot altitude! Comes with cool self adhesive decals for that red, white and blue look.

Specifications:
Length: 11" (27.9cm) Diameter: 0.74" (18.8mm) Weight: 0.4oz (12g)
Max Altitude: 1400ft (427m) Recovery: Streamer
Fins: Balsa Engines: A8-3, B4-4, B6-4, B6-6, C6-5, C6-7

Please note: no engines are included with this item

Estes flying scale model rocket kit #1382
Comanche-3, 3 Stage Flying Model Rocket Kit

Flies to 2660 feet (805m)!!
When two stages simply aren't enough, try three!
A "D" engine powered booster stage gets things going in a hurry.
This is Estes' highest flying rocket.
Dual streamer recovery.
Cardboard body tube.
Die cut balsa fins.
Skill level 3 model.
Estes' full 1 year warranty.
Detailed illustrated assembly and launch instructions.

Requires Assembly, Engines, Estes 3/16" (5mm) Maxi Launch Rod, Paint, Igniters, Wadding, Launch System

Length: 41" 104.1cm)
Diameter: 0.98" (24.9mm)
Weight: 2.1 oz. (59g)
Recovery: Two Streamers
Fins: Die cut balsa
Maximum Altitude: 2660' (811m)
Recommended Engines:
Single Stage Flights: A8-3, B4-4, B6-4, C6-5
Three Stage Flights: Booster C11-0, D12-0; Second Stage B6-0, C6-0;
Third Stage B6-6, C6-7

please note: no engines included

Estes flying scale model rocket kit #1894
Sky Hawker Ready To Fly Rocket kit

The Sky Hawker ready-to-fly rocket will prey on the clouds! This sleek bird soars over 1,000 feet! The Sky Hawker comes in a new 'rocket shape' package and launches on standard Estes engines.

Length: 16.5in
Diameter 0.98in
Weight: .98oz
Recovery: 12in parachute
Recommended Motors: A8-3, B4-4, B6-4, C6-5, C6-7
(NO engines are included with this item)

Estes flying scale model rocket kit #1895
The Patriarch HSO Ready To Fly (RTF) Model Rocket kit

This fully assembled model rocket is based on the long-range ballistic missile used in the National Missile Defense system. Special clear fins allow the rocket to look like a real missile as it blasts off 600 feet into the air!

Durable plastic nose cone.
Launchable over and over again on standard Estes® engines.
A pre-assembled, 12" plastic parachute for recovery.
Detailed illustrated assembly and launching instructions.

Engines: A8-3, B4-4, B6-4, C6-5

Length: 18.0" (46cm)
Diameter: 1.35" (35mm)
Weight: 2.7oz (75g)
Altitude: 600ft (183m)

(NO engines are included with this item)

Estes flying scale model rocket kit #1896
The Puma Ready To Fly Model Rocket

Fully assembled and decorated.
Use mini-engines to launch up to 800 feet in the sky!
Recovered with a 9 inch hi-viz orange streamer.
Durable plastic nose cone and fins.
Launchable over and over again.
Detailed launching instructions.
Unique blister packaging that's peggable, as well as able to
stand alone due to its clamshell base.

Requires:
Engines: 1/2A3-2T or 1/2A3-4T or A3-4T or A10-3T
Igniters
Recovery Wadding
Launch System
Length: 10.3" (26cm)
Diameter: 0.54" (13.8mm)
Weight: 0.4oz (12g)
Altitude: 800ft (244m)
Suitable for Ages 12 & Older
please note: no engines are included with this kit.

Estes flying model rocket kit #1903
Maxi Alpha 3 Model Rocket

Skill Level 2

NOW AVAILABLE! Proudly made in the USA.
Back by popular demand, Estes once again brings you the Maxi Alpha 3.

ATTENTION: Requires Estes Maxi™ Launch Rod - Sold Separately

Skill Level 2

D & E engine power at its finest! Powered by a D12-3, E9-4* or an E9-6*, the Maxi Alpha 3 can reach heights of 700 feet! That's pretty amazing for a rocket that weighs over 6 ounces yet is fairly simple to build.

It might take an afternoon of your time but then it's off to the flying field to have some fun!

Technical Specifications
Skill Level 2
Length: 33.25 in. (84.5 cm)
Diameter: 2.6 in. (66 mm)
Estimated Weight: 6.6 oz. (187 g)
Plastic Fins, Self-stick Decals, 24 in (61 cm) Parachute Recovery
Recommended Engines: D12-3 (First Flight), E9-4*, E9-6*
Projected Max Altitude: 700 ft. (213 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

* E engines require an E Launch Controller and E Launch Pad and you have to be 18 to purchase E engines.

Requires (not included): Assembly, Launch Pad, Engines, Igniters, Recovery Wadding, Finishing Supplies, Launch Supplies.

Estes flying model rocket kit #1906
Rascal

Skill Level RTF

This ready to fly mischievous Rascal will give you hours of flying fun. Soars to over 1100 feet using standard Estes engines.

Description
The Estes Rascal is the perfect rocket for you! Right out of the box, this Rascal is ready to provide hours of thrilling, high performance model rocket flying!
Returns to earth by a 12 in. parachute.

Technical Specifications
Skill Level RTF
Length: 14 in. (35.6 cm), Diameter: .98 in. (25 mm), Weigth: 1.52 oz (43 g).
Recommended Engines: A8-3 (First Flight), B4-4, B6-4, C6-5, C6-7
Max Altitude: 1200 ft. (366 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Estes flying model rocket kit #1907
Hi Jinks Ready To Fly Rocket

The ready to fly Hi Jinks is a great rocket to take to the flying field when you are short on time, but want to fly!

Description
The Estes Hi Jinks is a brightly colored, ready to fly, standard engine powered kit. Get ready for a flying experience! The Hi Jinks is 14 inches tall and is factory assembled and decorated.

This Hi Jinks can reach altitudes of well over 1100 feet. Recovery is safe and reliable with its 12 in parachute. The Hi Jinks is high performance model rocket flying fun of the easiest kind.

Technical Specifications
Skill Level RTF
Length: 14 in. (35.6 cm), Diameter: 0.98 in. (25 mm), Weigth: 1.52 oz. (43 g).
Plastic Molded Fins, Self-stick Decal, Recovery 12 in Parachute.
Recommended Engines: A8-3 (First Flight), B4-4, B6-4, C6-5, C6-7.
Max Altitude: 1200 ft. (366 m)

Estes flying scale model rocket kit #1948
BIG BERTHA Flying Model Rocket kit

Burly, big and beautiful! Over the decades this is the first big (two feet tall) rocket for many modelers. Slow, realistic lift-offs from this true classic.

SPECS:
Length: 24 in. (61 cm)
Dia.: 1.64 in. (41.6 mm)
Wt.: 2.2 oz. (62 g)
Recovery: 18 in. (46 cm)
Fins: Die cut balsa
Max. Altitude: 500 ft. (152 m)
Recommended Engines: B4-2, B4-4, B6-2, B6-4,C6-5

(NO engines are included with this item)

Estes flying scale model rocket kit #1949
Viking Rocket kit

Fantastic rocket with multiple possible fin configurations - 12 in tall. Features die cut card fins, self-adhesive decals and streamer recovery. Super high altitude flights!

Specifications:
Length: 12.1" (30.7cm) Diameter: 0.74" (18.8mm) Weight: 0.6oz (17g)
Max Altitude: 1470ft (448m) Recovery: Streamer
Fins: Card Stock Engines: A8-3, B4-4, B6-4, C6-5, C6-7

note: no engines included.

Estes flying model rocket kit #1951
The Executioner Flying Model Rocket

"E" Engine Powered Series
Assembly Kit Suitable for Ages 18 and Older.
Adult Supervision for Those Under 18.

Flies to 590 feet (180m) depending on chosen engine.
Skill Level 3 rocket.
Blow molded nose cone.
Laser cut wood fins.
Cardboard tube body.
24" (61cm) parachute recovery system.
Quick and easy to build.
Estes' full 1 year warranty.
Detailed illustrated assembly and launch instructions.

Requires Assembly
Engine: E9-4, E9-6
Launch System
Length 38.5"

Requires: Assembly, Model Rocket Engines, Wadding, Launch Pad, Launch Controller.

(NO engines are included with this item)

Estes flying scale model rocket kit #1960
Nova Payloader model rocket

BACK BY POPULAR DEMAND

Classic kit features clear plastic payload section perfect for launching small objects such as glow sticks, small action figures or bugs! Can fly over 1,000 without payload.

Balsa fins
Plastic nose cone
12 inch Parachute recovery
21 inches long
.976 inch diameter
Weighs 1.33 ounces
Skill Level 1
RECOMMENDED MOTORS
- (Without payload) A8-3, B4-4, B6-4 or C6-5 (With payload) B4-2, B6-2 or C6-3

note: no engines included.

Estes flying scale model rocket kit #2037
NASA D-REGION TOMAHAWK Flying Model Rocket kit

This awesome D and E engine rocket is a 1:5 scale model of NASA’s sounding rocket that was launched to the D layer of the ionosphere in 1968. The realistic D-Region

Tomahawk includes detailed parts, waterslide decals and a D engine adapter.
Length: 38.8 in. (98.6 cm)
Dia.: 1.8 in. (45.7 mm)
Wt.: 9.2 oz. (260 g)
Recovery: 18 in. (46 cm) Parachute
Fins: Laser cut balsa
Max. Altitude: 787 ft. (240 m)Recommended Engines: D12-5, E9-6*
Requires 3/16 in. (5 mm) Maxi launch rod
(302244) - sold separately.

Estes flying scale model rocket kit #2050
Super Neon Space Age Model Rocket

Space Age Tubular Fins!

Skill Level - 2
Length - 22.1 inches
Diameter - 0.976 inches
Weight - 1.7 oz.
Recovery System - 12 inch parachute
Maximum Altitude - 1,000 feet

RECOMMENDED ENGINES - A8-3, B4-4, B6-4, C6-5

note: no engines included.

Estes flying scale model rocket kit #2056
Patriot Defence Missile Rocket

The mother of all air defense missiles. This classic 1:10 scale model rocket is based on the U.S. Army's M-104 surface-air missile

1:10 Scale Surface - Air Missile
Authentic Decals
Parachute Recovery
Flies to 600 ft

Specifications:
Skill Level 1
Length: 21.3" (54cm)
Max Altitude: 600ft (183m) Recovery: 12" Parachute
Fins: Balsa Engines: A8-3, B4-4, B6-4, C6-5,

Please note: no engines are included with this item

Estes flying model rocket kit #2092
The Mongoose

Snakes won't get close to this agile and cunning Mongoose! The Estes Mongoose is the perfect first time building and flying experience for a newbie who wants to try their hand at flying a two stage rocket. A two stage rocket has two sections of the rocket with the engines stacked or staged one on top of the other. The lower or first stage contains a booster engine that kicks the rocket off the launch pad, and the upper or second stage has a standard engine inserted into it for extreme flight altitude. Recovery is usually by parachute or streamer. The action is always hot when flying a staged rocket!

The Mongoose has been given a face-lift and the new colors rock! A really cool purple body tube, a bright yellow plastic nose cone and fins and showy, self-stick decals build into one over the top, high performance rocket! A Skill Level 1 kit, this quick and easy builder will have you out at the flying field in no time!

The Mongoose can be flown as a single stage rocket or add a booster engine and watch this beast soar to astonishing heights of over 1,800 feet (549 m). Standing over 26 inches (67 cm) tall, this highflying rocket will descend back to earth on a shiny 18 inch (46 cm) preassembled parachute.

Length 26.5 in. (67.3 cm)
Diameter 0.97 in. (24.9 mm)
Weight 2.3 oz. (65.2 g)
Molded Plastic Fins
Self Stick Decals
Parachute Recovery
Recommended Engines A8-3, A8-5, B4-4,
Max Altitude: 1800 ft. (549 m)

Glue, modeling tools, Estes engines and launch supplies not included. Recommended for ages 10 and up with adult supervision for those under 12.

Note: Engines not included

Estes flying scale model rocket kit #2117
The Screaming Eagle Model Rocket

This realistic jet fighter can fly up to 600 feet high!
Laser cut balsa wings.
Durable White plastic nose cone.
12 inch, colorful plastic parachute.
Waterslide decals.
Detailed illustrated assembly and launching instructions.

Requires:
Assembly
Engines: A8-3 or B4-4 or B6-4 or C6-5
Igniters
Recovery Wadding
Finishing Supplies
Launch System

Length: 16.75" (42.5cm)
Diameter: 1.0" (25.4mm)
Weight: 2.3 oz (65.2g)
Altitude: 600ft (183m)
Skill Level 2
Suitable for Ages 14 & Older.

please note: no engines are included with this kit.

Estes flying scale model rocket kit #2123
Eggscalibur Egg Launching Model Rocket

What's the breaking point when you launch a raw egg over 600 feet high? Find out when you use an Estes E engine!
A clear, see-thru capsule houses the egg while waiting for take-off.
Laser cut balsa fins.
A slow and gentle recovery with dual parachutes (a 12" and 18").
Optional decals.
Adapters to launch with Estes B, C, D, or E model rocket engines
are also included.
Detailed illustrated assembly and launching instructions.

Skill Level 2
Length: 20.25" (51.4cm)
Diameter: 1.35" (34.2mm)
Weight: 2.6 oz (74g) --w/o egg
Altitude: 610 ft (186m)
Suitable for Ages 18 & Older.

note: no engines are included with this kit.

Estes flying model rocket kit #1903
MIRV Multiple Re-Entry Vehicle Model Rocket

Skill Level 3
NOW AVAILABLE!

An awesome two stage rocket that is really 4 rockets in one!

Enter the world of Multiple Re-Entry Vehicles with the Estes MIRV. The angular design of the model allows three independently powered rockets to separate from the booster which then climb to out of site flights. This model includes light weight foam, specially molded plastic parts and laser cut wood fins. Recovery of the three upper stages is by “High Drag Recovery” which allows them to float gently back to Earth.

PLEASE NOTE: Requires 4 engines to launch. 1 B6-0 or C6-0 and 3 A10-3T's.

Technical Specifications
Skill Level 3
Length: 24.5 in. (62.2 cm)
Diameter: 1.64 in. (42 mm)
Estimated Weight: 4.7 oz. (134 g)
Laser Cut Wood Fins, Waterslide Decals, Parachute Recovery
Recommended Engines: Booster - B6-0 (First Flight), C6-0, Second Stage - A10-3T only
Projected Max Altitude: 600 ft. (183 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Requires (not included): Assembly, Launch Pad, Engines, Igniters, Recovery Wadding, Finishing Supplies, Launch Supplies.

Estes flying model rocket kit #2146
Rock-it Stone Age Flyer Rocket

This could be the rocket the cave men launched! The Rock-it Stone Age Flyer is a Skill Level 1 kit that launches on Estes C11 or D engines. Underneath its rocky exterior is laser cut fins, a pre-shaped stone nose cone and a sleek design that launches this rock to over 540 feet.

Specs:
Length: 19.25in
Diameter 2.6in
Weight: 5.3oz
Recovery: 18in parachute
Recommended Motors: C11-3, D12-3, D12-5

Requires: Assembly, Launch Pad, Engines, Igniters, Recovery Wadding, Finishing Supplies, Launch Supplies, note: no engines included.

The Big Daddy E Flying Model Rocket kit

The Big Daddy has been redesigned to fly over twice as high as the older version! With its contemporary new look, Big Daddy can fly with E engines that enable an altitude up to 900 feet!
Plastic nose cone.
Laser cut balsa fins.
Decorative decals.
24 inch pre-assembled parachute for recovery.
Detailed launching instructions, NAR Safety Code, Rocketeer's Guide,

Requires: Assembly, 3/16" Maxi Rod, Engines, Launch Supplies

Length: 19" (48.3cm)
Diameter: 3" (76.2mm)
Weight: 5.3oz. (150.3g)
Recovery: 24" (60cm)
Max Alt: 900 ft (274m)
Suitable for Ages 18 & Older.

Estes flying scale model rocket kit #2168
The Metalizer E2X Model Rocket

An all chrome model rocket that can fly over 760 feet high
on standard Estes engines!
Plastic nose cone and fins.
Launchable over and over again!
A multi-colored, pre-assembled 12" plastic parachute for recovery.
Detailed illustrated assembly and launching instructions.

Requires: Assembly, Glue
Engines: A8-3 or B4-4 or B6-4 or C6-5
Igniters, Recovery Wadding, Finishing Supplies, Launch System

Length: 22.5" (57.2cm)
Diameter: 1.35" (34mm)
Weight: 2.4oz (69g)
Altitude: 760ft (232m)
Skill Level E2X
Suitable for Ages 10 & Older.

please note: no engines are include

Estes flying scale model rocket kit #2169
Dragonite Flying Rocket Easy Snap kit

Estes Dragonite Kit - Snaps together in minutes so no glue is needed! Already molded in full color with peel and stick decals so no painting is needed to look just like the picture! Flights up to 1,100 feet on a C6-7

Length: 16.0in
Diameter: 1.09in
Weight: 1.8oz
Recovery: 12in Parachute
Recommended Motors: A8-3,B4-4,B6-4,C6-5,C6-7

note: no engines included.

Estes flying scale model rocket kit #2178
Hi-Flier Beginner model Rocket

Skill Level 1
A high altitude rocket that can soar over 1675 feet (510 meters)!
Streamer recovery system.
One-piece, tapered white plastic nose cone.
Die-cut balsa fins.
Self-adhesive "Hi-Flier" decals.
Step-by-step, detailed assembly instructions with illustrations.

Requires Assembly
Engines: Recommended 1/2A6-2, A8-3, A8-5, B4-4
B6-4, B6-6, C6-5, C6-7
Length: 12" (30.5cm)
Diameter: 0.74" (18.8mm)
Weight: 0.82oz (23.2g)

Please note: no engines are included with this item

Estes flying scale model rocket kit #2179
Guardian Rocket ground-to-air missile

The Guardian rocket simulates a ground-to-air missile. This multi-finned rocket is the guardian of the sky.

Skill Level 2 rocket, over 700 ft. (213 m).
Length: 19.13 in. (48.6 cm)
Diameter: 1.33 in. (33.8 mm)
Weight: 2.4 oz. (68.6 g)
Recovery: 12 in. (30 cm) Parachute
Fins: Die cut balsa
Maximum Altitude: 723 ft. (220 m)
Recommended Engines: A8-3, B4-4; B6-4; B6-6; C6-5
note: no engines are included with this item

Estes flying scale model rocket kit #2181
Chrome Dome Gold Series E2X

Assembles in minutes!
Gold chrome, plastic nose cone and fins!
Streaks over 600 feet (183 meters).
Fully decorated, red body tube.
Parachute recovery system.
Self-adhesive "Chrome Domes" decal.
Step-by-step, detailed assembly instructions with illustrations.

Requires: Assembly, Engines: Recommended A8-3, B4-4, B6-4, C6-5, Wadding, Launch Supplies

Length: 18" (45.7cm)
Diameter: 1.35" (34.3mm)
Weight: 2.7oz (75g)
Recovery: 12" (30cm)

note: no engines are included with this kit.

Estes flying scale model rocket kit #2183
Shuttle Express E2X rocket kit

This rocket carries two shuttles into space! After liftoff, shuttles will separate from the rocket's body and glide back to Earth!
Parachute recovery system.
Pre-decorated, one-piece plastic nose cone.
Styrofoam shuttle bodies.
Pre-decorated rocket body tubes.
Pre-decorated plastic shuttle fins.
Step-by-step, detailed assembly instructions with illustrations.
Requires Engines: Recommended B4-2, B4-4, B6-2 B6-4, C6-3, C6-5, Igniters, Wadding, Launch Supplies
Length: 17.75" (45.1cm) Diameter: 1.33" (33.8mm) Weight: 2.9oz (82.2g) Recovery: 12" (30cm)

note: no engines are included with this kit.

Estes flying scale model rocket kit #2186
Eagle Boost Glider and power pod kit

Eagle is an E2X Model Rocket Boosted Glider from Estes.
Completely decorated and easy-to-assemble glider and power pod. The rocket booster sends this glider 500 feet into the air! As the glider gently returns to earth, the rocket booster (engine pod) returns with the aid of a streamer.

Length: 24.8" (62.9cm)
Wingspan: 13" (33cm)
Diameter: 0.74" (18.8mm)
Weight: 3.4oz (97.1g)
Altitude: 500 ft (152m)

Please note: no engines are included with this item

Estes flying scale model rocket kit #2196
Space Ship One E LARGE Rocket

Mojave Aerospace Ventures' SpaceShipOne Flying Model Rocket Replica. A 1:15 scale replica of spacecraft designed by Burt Rutan, which was the winner of the privately funded $10,000,000 Ansari X Prize.

E-engine powered to fly 600 feet high in the sky!
Precision cut EPS foam parts.
Durable plastic white nose cone.
A large 4 inch diameter fuselage!
Fully assembled 18 inch nylon parachute.
Peel-n-stick decals are provided.
Detailed illustrated assembly and launching instructions.

Requires: Assembly, 3/16" Maxi Rod, Estes E Launch Controller, Estes® Porta-Pad E Launch Pad, Adhesives, Recovery Wadding, Paint

Engines: E9-4 or E9-6
Scale: 1:15
Length: 26" (66cm)
Wingspan: 12.8" (32.5cm)
Diameter: 4" (102mm)
Weight: 11 oz (311g)
Altitude: 600ft (183m)
Suitable for Ages 18 & Older.

note: no engines included

Estes flying model rocket kit #2401
Solar Flare

Skill Level 2

One of Estes' newer kits, the Solar Flare features two styles of recovery, a payload capsule and can be flown as a single stage or two stage rocket!

Description
Blaze up the sky with a swift, bright light - the Solar Flare! This flashy, two-stage rocket launch set is sure to be the buzz of rocket enthusiasts everywhere, so why not be among the first to own one. This two stage rocket stands over 28 inches tall. Its innovative ring design makes this rocket a one of a kind on any launch pad.

The Solar Flare is a Skill Level 2 rocket kit that features laser cut balsa fins, high quality body tubes, clear payload section and a plastic nose cone for a straightforward assembly. The B or C powered booster stage has a tapered look and makes this rocket look like an intergalactic researcher. In addition to a two stage rocket, you can fly the upper stage on an A10 mini engine without the booster. You're actually getting two extremely cool rockets in one kit.

This rocket features two different styles of recovery, tumble (for the booster stage) and a colorful 12 inch preassembled parachute for the upper stage. It flies almost 800 feet high using Estes' booster and/or mini engines. Launch your payload experiments with a flare!

Technical Specifications
Length: 27 in. (68.6 cm), Diameter: .98 in. (25 mm), Weight: 3.2 oz. (90.7 g),
Laser Cut Balsa Fins, Waterslide Decals, Parachute Recovery, Payloader/2 Stage.
Recommended Engines: A10-3T, B6-0, C6-0.
Max Altitude: 800 ft. (244 m)

Estes flying model rocket kit #2410
The Renegade-D

Witness a spectacular liftoff when you launch the Estes Renegade-D! This rebel rocket is the perfect space pirate vehicle. It will give you and your outlaw crew superb suborbital flights that pirates need to intercept space missions. This is truly a sleek, galactic-shaped, multi-fin beauty and a must-have for all model rocket enthusiasts.

This Skill Level 3 kit has many innovative assembly features that include a one piece main body tube, laser cut fins and wings, plastic wing pod, a cool molded canopy nose cone and a pirate-themed waterslide decal set. This rebel is a real standout at the launch field! Great looks aren't all this outlaw has. When launched with a powerful Estes D12-5 engine, this smoking hot, high flying spacecraft can reach heights over 850 feet (260 m ). This cruiser slowly descends on a large, colorful 18 inch (46 cm) preassembled parachute.

Construction and flying of this kit requires a higher level of skill and may take a couple of days to complete. Glue, modeling tools, finishing supplies, Estes D12-5 engines, launch controller and launch pad with a 3/16 inch (5 mm) Maxi Launch Rod are also required - sold separately. Recommended for ages 10 and up with adult supervision for those under 12.

Length 26.6 in. (67.6 cm)
Diameter 1.64 in. (41.7 mm)
Weight 4.3 oz. (120.9 g)
Laser Cut Balsa Fins
Water Slide Decals
Parachute Recovery
D Engine Power
Recommended Engines
D12-5
Max Altitude: 850 ft. (260 m)
Skill 3
note: no engines included.

Estes flying model rocket kit #2421
Cosmic Explorer

Skill Level 1

Another great new rocket! What can we say? Only that we employ some of the finest and best rocket designers in the world! A Skill Level 1 kit, the Cosmic Explorer is a high performance, sport rocket that won't take hours and hours to build.

Description
Search the cosmos with the Estes Cosmic Explorer! This unique sport rocket has styling and power that’s BIG on performance. The Cosmic Explorer is an easy to assemble, high tech marvel on the launch pad. Powered with standard Estes engines, this adventurer can easily top the 1,000 foot level, then returns safely on a large 18 inch preassembled parachute.

This easy to build, Skill Level 1 rocket is over 2 feet tall! It features quality body tubes, a super big balsa nose cone, laser cut balsa fins and easy to apply waterslide decals. This action-packed rocket is great for beginners who are looking for awesome, high altitude performance in a remarkably streamlined rocket!
Technical Specifications
Skill Level 1

Length: 24 in. (60.9 cm), Diameter: 1.33 in, (34 mm), Weight: 2.75 oz. (78 g), Recovery: 18 in. (46 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser Cut Balsa Fins.

Recommended Engines: B4-4, B6-4, C6-5

Max Altitude: 650 ft. (198 m)

Requires (not included): Assembly, Launch Pad, Engines, Igniters, Recovery Wadding, Finishing Supplies, Launch Supplies.

Estes flying model rocket kit #2422
Reflector

Skill Level 1

A huge paylaod section, laser cut balsa fins and a high quality balsa nose cone. Just another day at the Estes rocket shop and another super design. Designed to reach heights of 750 feet on standard Estes engines, the Reflector is a great kit for the beginner or experienced builder.

Shine beams of light from this rocket! The Reflector by Estes features a huge payload section intended for heavy duty lifting on standard engines. With its unique shape and squared fin design, this rocket will join a long list of popular Estes payload rockets.

Description
The Reflector stands over 20 inches tall and flies on standard Estes engines. The immense payload section is over an inch in diameter and can be filled with all sorts of fun things from bugs to small action figures. Try some hard candy and see how high your rocket flies. As a science experiment, see how your payload withstands a suborbital journey when boosted to cloud base.

This easy to build kit features our high quality body tubes, a balsa nose cone, laser cut balsa fins and easy to apply waterslide decals. After being launched to over 750 feet high, recovery of your space cargo is accomplished on a colorful 12 inch preassembled parachute. The Reflector is a perfect choice for the first time payload rocket builder!

Technical Specifications

Skill Level 1

Length: 20.25 in. (51.4 cm), Diameter: 1.33 in. (34 mm), Weight: 2.1 oz (60 g), Recovery: 12 in. (30 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser cut Balsa Fins

Recommended Engines: B4-4, B6-4, C6-5

Max Altitude: 750 ft. (228 m)

Requires (not included): Assembly, Launch Pad, Engines, Igniters, Recovery Wadding, Finishing Supplies, Launch Supplies.

Estes flying model rocket kit #2425
Super Neon XL

Skill Level 3

D and E Engine powered at its finest! The Super Neon XL is one massive rocket standing nearly 3 feet tall that is sure to be a great addition to any rocket collection! A multi-tube fin design ensures superior flight and a one-of-a-kind look!

ATTENTION: Requires Estes Maxi™ Launch Rod - Sold Separately

Description
What a sight to see in the sky! This huge rocket will blow you away while it screams to the upper atmosphere! The Super Neon XL is one HOT rocket that utilizes space age multi-tube fin design to provide superior flight stability and a one-of-a-kind look! This rocket is a gigantic, more powerful upscaled version of the Estes Super Neon.

The Super Neon XL is original in shape and style as previously done by the Estes pros a decade ago. It has been retrofitted with parts made from the latest manufacturing processes, such as laser cut balsa parts, a high quality balsa nose cone, neon waterslide decals and top quality Estes body tubes. These features combine to guarantee outstanding flight performance. Did we mention it's super-sized? Towering over most rockets at 37 inches, the XL lifts off into orbit on powerful Estes D and E engines to amazing heights of 1,000 feet. It returns smoothly using a vivid 24 inch preassembled parachute.

Technical Specifications
Skill Level 3

Length 35 in. (88.9 cm), Diameter 1.64 in. (42 mm), Weight 6.8 oz. (193 g)

Laser Cut Balsa Fins, Waterslide Decals, 24 in. (61 cm) Parachute Recovery

Recommended Engines: D12-3, D12-5, E9-4, E9-6

Max Altitude: 1000 ft. (305 m)

Estes E engine powered rocket kits are recommended for ages 18 and up with adult supervisions for those under 18. Unless otherwise specified, all models require assembly. Engines, launch systems, batteries, glue, building tools and finishing supplies are not included. Estes E rocket kits require the Estes E Launch Controller, Porta-Pad E Launch Pad and 3/16 in. (5 mm) Maxi Rod for launching - sold separately.

Estes flying model rocket kit #2430
Gold Strike / Silver Streak 2 rocket pack

Skill Level E2X - Gold Strike™
Skill Level E2X - Silver Streak™

2 rockets for the price of one. It doesn't get any better than that! The Gold Strike is the first rocket in our Recession Fighter Series and as a bonus, you get the Silver Streak, a mini-engine powered rocket, FREE!

Description
From our E2X (Easy to Assemble) series, Estes brings to you a two-for-one rocket kit. The Gold Strike and it's sidekick, the Silver Streak, are both easy to assemble rockets.

Launched on standard Estes engines, the Gold Strike can reach heights of 725 feet while the Silver Streak, powered by Mini Engines reaches 200 feet. Both rockets will brighten up the sky with their shimmery body tubes and brightly colored parachutes.

Grab a friend and head to the flying field. Why not, you get two great rockets in this kit! Might as well share the fun with a friend!

Technical Specifications
Skill Level E2X - Gold Strike

Length: 18.75 in. (47.6 cm), Diameter: 1.33 in. (34 mm), Weight: 2.17 oz. (61.5 g)

Plastic Nose Cone and Fins, Self-stick Decals, 12 in. (30 cm) Parachute Recovery

Recommended Engines: B4-4, B6-4, C6-5

Max Altitude: 725 ft. (221 m)

Skill Level E2X - Silver Streak

Length: 10 in. (25.4 cm), Diameter: .74 in. (19 mm), Weight: .65 oz. (18.4 g)

Plastic Nose Cone and Fins, Self-stick Decals, 12 in. (30 cm) Parachute Recovery

Recommended Engines: 1/4A3-3T, 1/2A3-2T

Max Altitude: 200 ft. (61 m)

Estes flying model rocket kit #2440
Magician Payload Rocket

Skill Level 3

The super talented rocket scientists really cooked up some "magic" with this one! Standing an impressive 33.5 inches tall, the Magician can reach soaring heights of 1600 feet when flown on Estes D and E Engines. The clear payload section is just an added bonus!

..002440 - Magician™ Description
.Conjure up some special, space magic with the Magician! No tricks up anyone’s sleeve here, just a super high performance payload model rocket. The talented Estes rocket shop designers have spun their magic to create an enormous, supersized payload rocket. The Magician can handle all the power you put in the motor tube to send it on a magical mystery tour…of the atmospheric kind!

This sorcerer stands an impressive 33.5 inches tall and has a clear payload section. You can launch just about anything into space. Well, not quite anything, but it’s sure to hold a small race car, an action figure, or whatever your imagination can dream up. If it fits into the payload section, launch it!

A Skill Level 3 rocket, this kit comes with a high quality balsa nose cone, laser cut balsa fins and waterslide decals. Designed to be flown on D or E engines, this rocket will scream off the launch pad to heights over 1,600 feet. Getting this illusionist back to earth is magically accomplished on a colorful preassembled 18 inch parachute.

Technical Specifications
Skill Level 3

Length: 33.5 in. (85 cm), Diameter: 1.33 in. (34 mm), Weight: 3.5 oz. (100 g), Recovery: 18 in. (46 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser cut Balsa Fins, Clear Payload Section

Recommneded Engines: D12-5, E9-6

Max Altitude: 1600 ft. (488 m)

Estes E engine powered rocket kits are recommended for ages 18 and up with adult supervision for those under 18. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, an Estes E Launch Controller and Porta-Pad E Launch Pad, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified. This rocket may be launched from a Porta-Pad II. If using a Porta-Pad II, a 3/16" (5 mm) Maxi Rod is required. Sold Separately.

Estes flying model rocket kit #2445
Mini Max Ballistic Rocket

Skill Level 1

A miniature Der Red Max? That's right, that's exactly what the Mini Max is! A great kit now downsized and sure to be a hit with everyone. Great for beginners and a must have for all rocket collectors!

Description
You want it, we’ve got it! Since the Der Red Max is so extremely popular, we’ve created another smash hit with a smaller version of the Estes classic. Just like the Der Red Max, the Mini Max is uniquely designed. It has the same ballistic shaped nose cone and stubby fins as its bigger counterpart. Standing almost 10 inches tall, this miniature version definitely has a personality all its own!

Powered by Estes mini engines, it can reach amazing heights of 400 feet. After its aerial assault, recovery is accomplished with a high-viz streamer.

The new Mini Max has all the great looks of the classic version, right down to the really cool skull and crossbones decals. Like many of our new and classic kits, the Mini features a balsa nose cone, laser cut balsa fins and waterslide decals.

Technical Specifications
Skill Level 1

Length: 9.75 in. (24.8 cm), Diameter: 0.98 in. (25 mm), Weight: 1.3 oz. (37 g), Recovery: Streamer

High Quality Balsa Nose Cone, Laser cut Balsa Fins, Waterslide Decals

Recommended Engines: 1/2A3-2T, 1/2A3-4T, A3-4T, A10-3T

Max Altitude: 300 ft. (61.5 m)

Estes flying model rocket kit #2446
Mini Honest John

Mini engine powered, this sport scaled model of a U.S. battle field artillery missile features a detailed molded nose cone and laser cut balsa fins.

Mini engine powered, this sport scaled model of a U.S. battle field artillery missile features a detailed molded nose cone and balsa fins. Although simple in construction the resulting model features plenty of detail that you will be proud to display.

Technical Specifications
Skill Level 1
Length: 11.75 in. (29.8 cm)
Diameter: .98 in. (25 mm)
Estimated Weight: 1.2 oz. (34 g)
Laser Cut Balsa Fins, Waterslide Decals, Parachute Recovery
Recommended Engines: 1/2A3-2T (First Flight), A3-4T, A10-3T
Projected Max Altitude: 325 ft. (99 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Estes flying model rocket kit #2447
Astron Elliptic II

Mini Engine powered 2-stage kit.

With its classic elliptical shaped fins and graceful styling the 2-stage Astron Elliptic II features easy straight forward construction with out of site performance. Streamer and tumble recovery brings this awesome rocket back to earth. Mini Engine powered, the Astron Elliptic can reach heights of 925 feet!

Technical Specifications
Skill Level 2
Length: 23.3 in. (59.2 cm), Diameter: .74 in. (19 mm) , Estimated Weight: 1 oz. (28.3 g)
Laser Cut Wood Fins, Waterslide Decals, Streamer and Tumble Recovery
Recommended Engines: Booster Stage - A10-0T, Upper Stage - 1/2A3-4T (First Flight), 1/4A3-3T, A3-4T, A10-3T, Single Stage - 1/2A3-2T, A3-4T, A10-3T

Projected Max Altitude: 925 ft. (282 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Estes flying model rocket kit #2450
EX-200

Skill Level RTF

Fully Assembled! It just doesn't get any easier than that. The EX-200 flies an amazing 425 feet on Estes Mini Engines. Just one of four new ready-to-fly kits, you'll want to get them all!

In a hurry with no time to build or are you just looking for another great flying, high performance rocket to add to your collection? Brand new for 2009, Estes has just the rockets for you!

New to the Estes line are four fully assembled, great looking and high-flying model rockets. The Ex-200, Athena, SkyTrax and Loadstar all fly on mini or standard Estes engines and give hours of flying enjoyment. Rockets range in height from 13.75 inches to 22.5 inches, can reach cloud-busting heights of 1100 feet and are easily recovered with 12 inch, brightly colored, fully assembled parachutes.

Each ready-to-fly rocket is sold separately and requires a launch system, also sold separately.

Technical Specifications
Skill Level RTF

Length: 13.75 in. (34.9 cm), Diameter: .74 in. (19 mm), Weight: 1.1 oz. (31.1 g), Recovery: 12 in. (30 cm) parachute.
Recommended Engines: 1/2A3-2T, A3-4T, A10-3T
Max Altitude: 425 feet (130 m)

Estes flying model rocket kit #2451
Fuse Ready to Fly

Fully Assembled! Mini Engine Powered! It just doesn't get any easier than that. The Fuse flies to an amazing height of 550 feet. Just one of four new ready-to-fly kits, you'll want to get them all!

Description
In a hurry with no time to build or are you just looking for another great flying, high performance rocket to add to your collection? NEW for 2010, Estes has just the rockets for you!

New to the Estes line are four fully assembled, great looking and high-flying model rockets. The Fuse, Summit, Code Red and Prospector all fly on mini or standard Estes engines and give hours of flying enjoyment. Rockets range in height from 13.1 inches to 23 inches, can reach heights of 700 feet and are easily recovered with 12 inch, brightly colored, fully assembled parachutes or a streamer.

Each ready-to-fly rocket is sold separately and requires a launch system, also sold separately.
Technical Specifications
Skill Level RTF

Length: 13.1 in. (33.3 cm), Diameter: .74 in. (19 mm), Estimated Weight: .78 oz. (22.1 g)

12 in. (30.5 cm) Parachute Recovery

Recommended Engines: 1/2A3-4T, A3-4T, A10-3TProjected Altitude: 550 feet (168 m)

Estes flying model rocket kit #2452
Athena Ready-to-Fly

Skill Level RTF

One of four new Ready-to-Fly kits from Estes, the Athena is one cool rocket and comes fully assembled which means you get to the flying field quick. So grab a friend and get ready to have some fun!

Description
.In a hurry with no time to build or are you just looking for another great flying, high performance rocket to add to your collection? Brand new for 2009, Estes has just the rockets for you!

Each ready-to-fly rocket is sold separately and requires a launch system, also sold separately.

Technical Specifications
Skill Level RTF
Length: 16 in. (40.6 cm), Diameter: .98 in. (25 mm), Weight: 1.6 oz. (45.4 g), Recovery: 12 in. (30 cm) Parachute.
Recommended Engines: A8-3, B6-4, C6-5.
Max Altitude: 1100 ft. (335 m)

Estes flying model rocket kit #2453
Summit Ready to Fly

Fully Assembled! Mini Engine Powered! It just doesn't get any easier than that. The Summit flies to an amazing height of 525 feet. Just one of four new ready-to-fly kits, you'll want to get them all!

Description
In a hurry with no time to build or are you just looking for another great flying, high performance rocket to add to your collection? NEW for 2010, Estes has just the rockets for you!

Each ready-to-fly rocket is sold separately and requires a launch system, also sold separately.

Technical Specifications
Skill Level RTF
Length: 20.25 in. (51.4 cm), Diameter: .74 in. (19 mm), Estimated Weight: .85 oz. (24.1 g).
18 in. (46 cm) Streamer Recovery.
Recommended Engines: 1/2A3-4T, A3-4T, A10-3T.
Projected Altitude: 525 feet (160 m)

Estes flying model rocket kit #2454
SkyTrax Ready to Fly

Skill Level RTF

One "cool" rocket is just what this one is! New to the Estes line and fully assembled, the SkyTrax flies on standard engines and can reach heights of 700 feet. One of four new ready-to-fly rockets, you'll want to collect all of them!

Description
In a hurry with no time to build or are you just looking for another great flying, high performance rocket to add to your collection? Brand new for 2009, Estes has just the rockets for you!

Each ready-to-fly rocket is sold separately and requires a launch system, also sold separately.

Technical Specifications
Skill Level RTF.
Length: 20.75 in. (52.7 cm), Diameter: 1.34 in. (34 mm), Weight: 2.7 oz. (76.5 g), Recovery: 12 in. (30 cm) Parachute.
Max Altutide: 700 ft. (213 m)

Estes flying model rocket kit #2455
Code Red RTF - Ready to Fly Model Rocket

Fully Assembled! It just doesn't get any easier than that. The Code Red flies to an amazing height of 725 feet on standard engines.

Ready to Fly means Ready for FUN!! A great flying, high performance rocket is just what the Code Red is! No building or painting is necessary which means more time to fly.

Just one of many Ready to Fly kits, you'll want to get them all!

Technical Specifications
RTF - Ready to Fly
Length: 18.75 in. (47.6 cm)
Diameter: .1.35 in. (34 mm)
Estimated Weight: 2.2 oz. (62.4 g)
Plastic Fins, 12 in. (30.5 cm) Parachute Recovery
Recommended Engines: B4-4, B6-4 (First Flight), C6-5
Projected Altitude: 725 feet (221 m)

Requires (not included): Assembly, Launch Pad, Engines, Igniters, Recovery Wadding, Finishing Supplies, Launch Supplies.

Estes flying model rocket kit #2456
Loadstar Ready to Fly

Skill Level RTF

Fully Assembled and ready to go! The Loadstar, one of Estes' new four Ready to Fly kits, is one you will want to get! Standing almost 2 feet tall, this "star" can reach heights of 700 feet when powered by standard Estes engines.

Each ready-to-fly rocket is sold separately and requires a launch system, also sold separately.

Technical Specifications
Skill Level RTF
Length: 22.5 in. (57.1 cm), Diameter: 1.34 in. (34 mm), Weight: 2.4 oz. (68 g), Recovery: 12 in. (30 cm) Parachute.
Recommended Engines: B4-4, B6-4, C6-5.
Max Altitude: 700 ft. (213 m)

Estes flying model rocket kit #2457
Prospector Ready to Fly

Fully Assembled! Standard Engine Powered! It just doesn't get any easier than that. The Prospector flies to an amazing height of 700 feet. Just one of four new ready-to-fly kits, you'll want to get them all!

Description
In a hurry with no time to build or are you just looking for another great flying, high performance rocket to add to your collection? NEW for 2010, Estes has just the rockets for you!

Each ready-to-fly rocket is sold separately and requires a launch system, also sold separately.

Technical Specifications
Skill Level RTF
Length: 23 in. (58.4 cm), Diameter: 1.35 in. (34 mm), Estimated Weight: 2.4 oz. (68 g).
12 in. (30.5 cm) Parachute Recovery.
Recommended Engines: B4-4, B6-4, C6-5.
Projected Altitude: 700 feet (213 m)

Estes flying model rocket kit #3003
Alien Invader re-issue

Another great Classic returns! One of our most sought after kits, the Alien Invader was recreated almost in its entirety. Unique waterslide decals and laser cut balsa are just some of its features.

Description
The Alien Invader is yet another great rocket from days gone by. Another great addition to our Classic Series line, this rocket is a must-have for all serious rocketeers! Estes is once again proud to reintroduce you to another Classic!

A high quality plastic nose cone, laser cut balsa fins and waterslide decals mimic the original kit. Any changes Estes made only enhanced this classic kit.

Technical Specifications
Skill Level 2
Length: 20.2 in. (51.3 cm), Diameter: .98 in. (25 mm), Weight: 2.4 oz. (25 g), Recovery: 12 in. (30 cm) Parachute.
High Quality Plastic Nose Cone, Waterslide Decals, Laser cut Balsa Fins.
Recommended Engines: B4-4, B6-4, C6-5.
Max Altitude: 900 ft. (274 m)

Estes flying model rocket kit #3009
Chuter-Two

Dual parachutes bring you back to Earth in style after blasting off to heights of up to 900 ft. The unique fin design and colorful body of the Chuter-Two make it a great rocket for anyone.

Description
Another great addition to our classic series. Estes has gone back to the archives, pulled up old drawings and spec sheets and brought these fantastic flying machines back for old and new rocketeers to enjoy. This kit has been reproduced and updated while still retaining the classic lines of the original. The Chuter-Two kit contains our high quality body tubes, balsa nose cones and laser cut balsa fins.

Technical Specifications
Skill Level 1
Length: 18.5 inches (47 cm), Diameter: .98 inches (25 mm), Weight: 1.2 ounces 34 g).
Laser Cut Balsa Fins, Waterslide Decals, Dual 12 in. (30.5 cm) Parachute Recovery.
Recommended Engines: A8-3, B6-4, C6-5.
Projected Altitude: 900 ft. (274 m)

Estes flying model rocket kit #3013
Flutter-By

Launch it up - then watch it flutter down! This rocket is 7.7 inches tall and is able to soar up to 1,000 feet.

Description
Estes has gone back to the archives, pulled up old drawings and spec sheets and brought these fantastic flying machines back for old and new rocketeers to enjoy. Each kit has been reproduced and updated while still retaining the classic lines of the original. The Flutter-By is a unique rocket and is a blast to build and fly.

Technical Specifications
Skill Level 1
Length: 7.7 inches (19.5 cm), Diameter: .98 inches, (25 mm) Weight: 1 ounce (28.3 g).
Laser cut Balsa Fins, Waterslide Decals, Tumble Recovery.
Projected Altitude 1000 feet (305 m).
Recommended Engines: A8-3, B6-4, C6-5

Estes flying model rocket kit #3016
Long Tom

Skill Level 2

Another great "Classic" makes its return to the Estes line up. The mighty tall 2-stage Long Tom is even impressive just sitting on the launch pad!

Description
A sleek 2-stage sport rocket standing over 33 inches tall, the Long Tom is one mighty impressive rocket. This rocket can be flown as a single stage or 2-stage and can reach heights of 1100 amazing feet.

The Long Tom flies on standard engines and a bright 18 inch parachute brings him back to earth. Prepare him for re-launch with a new Estes engine, wadding, an igniter and igniter plug.

A high quality balsa nose cone, laser cut balsa fins and waterslide decals mimic the original kit. Any changes Estes made only enhanced this classic kit.

Technical Specifications
Skill Level 2

Length: 33.25 in. (84.4 cm), Diameter: 1.33 in. (33 mm), Weight: 3.2 oz. (91 g), Recovery: 18 in. (46 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser cut Balsa Fins

Recommended Engines: B6-0, B6-6, C6-0, C6-7

Max Altitude: 1100 ft. (488 m)

Estes flying model rocket kit #3022
Payloader II

Skill Level 1

A clear payload section is just an added bonus to yet another great "Classic" making an appearance for the first time in many years. The Paylaoder II was a hit in the 70's and is sure to be a hit in 2010!

Description
The Payloader II is yet another great rocket from days gone by. Another great addition to our "Classic Series" line, this rocket is a must-have for all serious rocketeers! Estes is once again proud to re-introduce you to another Classic!

A high quality balsa nose cone, laser cut balsa fins and waterslide decals mimic the original kit. Any changes Estes made only enhanced this classic kit.

Technical Specifications
Skill Level: 1

Length: 17 in. (43 cm), Diameter: .98 in. (25 mm), Weight: 1.2 oz. (62.4 g), Recovery: 12 in. (30 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser cut Balsa Fins.

Recommended Engines: A8-3, B6-4, C6-5

Max Altitude: 1000 ft. (305 m)

Estes flying model rocket kit #3024
Phoenix Bird

Skill Level 1

Another great "Classic" returns! This kit was recreated almost in its entireity. Through-the-tube Fin Assembly and Self-stick foil decals are just some of the features of the Phoenix Bird.

Description
Standing 2 feet tall, the Phoenix Bird is the perfect big kit for the beginning rocketeer. Simple construction gets this Bird to the launch pad in a hurry.

Everything about this kit is cool! From its simple construction to the really neat self-stick decals, the Phoenix Bird launches on standard Estes engines and can reach 550 feet.
Technical Specifications
Skill Level 1

Length: 24 in. (61 cm), Diameter: 1.33 in. (34 mm), Weight: 2.8 oz. (79 g), Recovery: 18 in. (46 cm) Parachute

Through-the-Tube Fin Assembly, High Quality Balsa Nose Cone, Self-stick Foil Decals, Laser cut Balsa Fins

Recommended Engines: B4-4, B6-4, C6-5

Max Altitude: 550 ft. (168 m)

Estes flying model rocket kit #3025
Photon Disruptor

Skill Level 2

The Photon Disruptor is yet another great rocket from days gone by. Another great addition to our "Classic Series" line, the Photon Disruptor is a must-have for all serious rocketeers! Estes is once again proud to re-introduce you to another Classic!

Photon Disruptor™ Description
Many years ago, Estes had and still has some of the best rocket designers in the world! With that thought in mind, it was decided to go to the archives and reintroduce some of those famous kits that rocketeers of all ages loved.

A high quality balsa nose cone, laser cut balsa fins and waterslide decals mimic the original kit. Any changes Estes made only enhanced this classic kit.

The Photon Disruptor is one of the first in the "Classis Series" to be re-released. Flying on standard engines, the Photon Disruptor is a must have for all serious rocketeteers!

Technical Specifications
Skill Level 2

Length: 24.5 in. (62.2 cm), Diameter: 1.33 in. (34 mm), Weight: 2.4 oz. (68 g)

Laser cut Balsa Fins, Watersilde Decals, 18 in. (46 cm) Parachute Recovery

Recommended Engines: B4-4, B6-4, C6-5

Max Altitude: 750 ft. (229 m)

Estes flying model rocket kit #3026
Photon Probe re-release

Skill Level 2

From the "Classic Series" line, the Photon Probe is based on an original Estes design. Originally appearing in the 1980's, Estes is proud to re-introduce you to some of the Classics!

Description
Many years ago, Estes had and still has some of the best rocket designers in the world! With that thought in mind, it was decided to go to the archives and reintroduce some of those famous kits that rocketeers of all ages loved.

The Photon Probe is one of the first in the "Classic Series" to be re-released. Flying on standard engines, the Photon Probe is a must have for all serious rocketeteers!

Technical Specifications
Skill Level 2

Length: 23 in. (58.4 cm), Diameter: 1.32 in. (34 mm), Weight: 3.45 oz. (98 g)

Laser cut Balsa Fins, Watersilde Decals, 18 in. (46 cm) Parachute Recovery

Recommended Engines: B4-4, B6-4, C6-5

Max Altitude: 575 ft. (175 m)

Estes flying model rocket kit #3027
Satellite Interceptor re-issue

Skill Level 2

From the long awaited return of some really great rockets, the Satellite Interceptor is sure to be a hit with rocket enthusiasts of all ages! A high quality balsa nose cone, laser cut balsa fins and waterslide decals mimic the original kit. Any changes Estes made only enhanced this classic!

Satellite Interceptor Description
Back in the pack! Another great rocket from the "Classic Series" is making a reappearance for the first time in many years. Designed by one of the Estes great rocket designers, the Satellite Interceptor is one kit you don't want to miss out on!

Allow yourself some extra time when building this kit as impressive, full color, waterslide decals are included and they will take a little extra time to apply.

Go ahead, go out there and pick up the latest addition to the "Classic Series" before it's gone again. This one is sure to be a hit just like it was the first time around!

Technical Specifications
Skill level 2

Length: 22.25 in. (56.2 cm), Diameter: .98 in. (25 mm), Weight: 2.3 oz. (65 g), Fin Span: 5.5 in. (14 cm), Recovery: 12 in. (30 cm) Parachute

Laser cut Balsa Fins, Balsa Nose Cone, Waterslide Decals.

Recommended Engines: B4-4, B6-4, C6-5

Max Altitude: 950 ft. (290 m)

Estes flying model rocket kit #3031
Star Trooper

Skill Level 1

Cruise the galaxy in style with the Star Trooper. This small rocket is able to fly up to 900 feet. It is a great rocket for beginners or any rocketeer looking to spice up their collection.

Description
.Part of the Estes Classic Series. Estes has gone back to the archives, pulled up old drawings and spec sheets and brought these fantastic flying machines back for old and new rocketeers to enjoy. This kit has been reproduced and updated while still retaining the classic lines of the original.

Technical Specifications
Skill Level 1

Length: 7.3 in. (19.6 cm), DIameter: .54 in. (14 mm) Weight: .3 oz (8.5 g)

Balsa Nose Cone, Laser cut Balsa Fins, Waterslide Decals, Streamer Recovery

Recommended Engines: 1/4A3-3T, 1/2A3-4T, A3-4T, A10-3T

Projected Altitude: 900 ft. (274 m)

Estes flying model rocket kit #3033
Twister

Skill Level 1

A whirlwind of wonder! Watch the Twister soar and spin up to 1,100 feet! At 13.8 inches tall, it is one of the highest soaring rockets of its size.

Description
Estes has gone back to the archives, pulled up old drawings and spec sheets and brought these fantastic flying machines back for old and new rocketeers to enjoy. Each kit has been reproduced and updated while still retaining the classic lines of the original. The Twister is designed for all ages and is easily built.

Technical Specifications
Skill Level 1

Length: 13.8 inches (35 cm), Diameter: .98 inches (25 mm), Weight: 1.1 ounces (31 g)

Laser cut Balsa Fins, Waterslide Decals, 12 in. (30.5 cm) Parachute Recovery

Projected Altitude 1,100 feet (335 m)

Recommended Engines: A8-3, B6-4, C6-5

Estes flying model rocket kit #3037
Hornet re-release

Skill Level 1

Another Estes Classic returns! Powered by standard Estes engines, the Hornet looks almost identical to its original counterpart.

Description
Back by popular demand, the Hornet is sure to be a crowd pleaser. Launched with standard engines this time around, this rocket can reach heights of 775 feet.

A high quality balsa nose cone, laser cut balsa fins and waterslide decals mimic the original kit. Any changes Estes made only enhanced this classic rocket.

A Skill Level 1 kit, building is straight forward with easy to follow instructions. Plan an afternoon to build and few hours to let that paint dry and before you know it, you will be on the flying field!

Technical Specifications
Skill Level 1

Length: 19.25 in. (48.9 cm), Diameter: 1.33 in. (34 mm), Weight: 2.3 oz. (65 g)

Laser cut Balsa Fins, Balsa Nose Cone, Waterslide Decals, 12 in. (30 cm) Parachute Recovery

Recommended Engines: B4-4, B6-4, C6-5

Max Altitude: 775 ft. (236 m)

Estes flying model rocket kit #3202
Comet Chaser

Skill Level 1

Just arrived and just in time for summer! The Comet Chaser soars over 1,100 feet and is powered by standard engines.

Description
Simple to glue and paint, the Comet Chaser deserves to be in your rocket collection or if you are just starting out, it's a great starter rocket. Just a few hours of your time and you'll be ready to go!

Technical Specifications
Skill Level 1

Length: 14.4 in. (36.5 cm), Diameter: .98 in. (25 mm), Weight: 1.26 oz. (35.7 g), Recovery: 12 in. (30.5 cm) Parachute

High Quality Waterslide Decals, Laser cut Balsa Fins

Recommended Engines: A8-3, B6-4, C6-5

Max Altitude: 1150 ft. (351 m)

Estes flying model rocket kit #3203
Equinox

Skill Level 1

Simple to build, the Equinox needs about an evening of your time, white or yellow glue and paint. Standing just 15 inches (38.1 cm) tall, this jewel can soar up to 1,575 (480 m) feet!

Description
Another Estes Flying Model Rocket to add to your collection. This one is simple to build yet impressive in looks! A Semi-Scale Reconnaissance rocket, the Equinox is sure to get you noticed at the flying field.

Technical Specifications
Skill Level 1

Length: 15 in (38.1 cm), Diameter: .74 in. (19 mm), Weight: 1.1 oz. (31.2 g), Recovery: 12 in. (30.5 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser cut Balsa

Recommended Engines: A8-3, B6-4, C6-5

Max Altitude: 1,575 ft.(480 m)

Estes flying model rocket kit #3205
Fusion X25

Skill Level 1

Simple to build and simple to fly, the Fusion X-25 is one cool rocket with a unique fin design. A show stopper, everyone needs to add this rocket to their collection.

Description
Designed with the new rocketeers in mind, the Fusion X25 is simple to build yet impressive on the launch pad. Launched on standard Estes engines, this rocket can reach heights over 1100 feet.

Technical Specifications
Skill Level 1

Length: 13.5 in. (34 cm), Diameter: .98 in. (25 mm), Weight: 1.25 oz. (35.4 g), Recovery: 12 in. (30.5 cm) Parachute

Laser cut Balsa Fins, Waterslide Decals, High Quality Nose Cone

Recommended Engines: A8-3, B6-4, C6-5

Projected Altitude: 1150 ft. (350.5 m)

Estes flying model rocket kit #3206
Star Stryker

Skill Level 1

The new rocketeer was in mind when this kit was designed. A simple to build, yet impressive on the launch pad, rocket, the Star Stryker has a clear payload section for launching the fun stuff.

Description
Simple to build yet impressive on the launch pad is just what the Star Stryker is! A great beginner "payload" rocket, the Star Stryker can reach heights over 1100 feet on a C6-5 engine. Now that's impressive! New and old time rocketeers will want this one.

Technical Specifications
Skill Level 1

Length: 16.8 in. (42.7 cm), Diameter: .98 in. (25 mm), Estmated Weight: 1.06 oz. (30 g), Recovery: 12 in. (30.5 cm) Parachite

Laser cut Balsa Fins, Waterslide Decals, Pre-assembled Parachute

Projected Altitude: 1175 ft. (358 m)

Estes flying model rocket kit #3207
Crossbow SST

Skill Level 1

Impressive yet powerful! Launched on an Estes C6-5 engine, the Crossbow SST can reach awesome heights of 1600 ft. Modeled after the Satellite Interceptor, this rocket is sure to be a hit!

Description
If you love the Satellite Interceptor then the Crossbow SST is just the rocket for you! Designed along the lines of the Satelitte Interceptor, the Crossbow SST is a down sized version of one of Estes' most popular kits!

Technical Specifications
Skill Level 1

Length: 14.4 in. (36.6 cm), Diameter: .74 in. (17 mm), Estimated Weight: 1.1 oz. (31.2 g), Recovery: 12 in. (30.5 cm) Parachute

Recommended Engines: A8-3, B6-4, C6-5

Projected Altitude: 1600 ft. (488 m)

Estes flying model rocket kit #3208
Ricochet

Simple to build, the Ricochet just needs a little of your time, white or yellow glue and paint. Another great kit from Estes, get one before they're gone!

Another Estes Flying Model Rocket to add to your collection. This one is simple to build yet impressive in looks! Standing over 22 inches (55.8 cm) the Ricochet is sure to be a crowd pleaser.

Technical Specifications

Skill Level 1
Length: 22 in (55.8 cm), Diameter: .98 in. (25 mm), Weight: 1.45 oz. (41 g), Recovery: 12 in. (30.5 cm) Parachute
High Quality Nose Cone, Waterslide Decals, Laser Cut Wood Fins
Recommended Engines: A8-3, B6-4, C6-5
Max Altitude: 1,125 ft.(343 m)

Estes flying model rocket kit #3209
Space Eagle

Skill Level 1

Simple to build, the Space Eagle just needs about an afternoon of your time, white or yellow glue and paint. Another great kit from Estes.

Description
The Space Eagle is a Solar Exploration Vehicle that is simple rocket to build and finish. Just another fine Estes Flying Model Rocket to add to your collection. Standing over 26 inches (66 cm) this rocket is sure to be a crowd pleaser.

Technical Specifications
Skill Level 1

Length: 26.75 in (67.9 cm), Diameter: .98 in. (25 mm), Weight: 2.2 oz. (62.4 g), Recovery: 12 in. (30.5 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser cut Balsa

Recommended Engines: B6-4, C6-5

Max Altitude: 975 ft.(297 m)

Estes flying model rocket kit #3210
Vector Force

Skill Level 1

Standing over 2 feet tall, The Vector Force is a must-have for all rocketeers! A simple to build and finish rocket yet impressive is the "word!" Impress your friends with this one, for sure.

Description
High quality laser cut balsa fins, waterslide decals and easy to follow instructions is what you would expect from the World Leader in Model Rocketry - Estes! The Vector Force lives up to the Estes name!

Technical Specifications
Skill Level 1

Length: 28.25 in (71.8 cm), Diameter: 1.33 in. (34 mm), Weight: 2.36 oz. (67 g), Recovery: 18 in. (46 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser cut Balsa

Recommended Engines: B6-4, C6-5

Max Altitude: 725 ft.(221 m)

Estes flying model rocket kit #3211
Plasma Probe

Skill Level 1

Standing about a foot and a half tall and reaching heights of 800 feet, the Plasma Probe needs to be the next rocket you add to your collection!

Description
High quality laser cut balsa fins, waterslide decals and easy to follow instructions is what you would expect from the World Leader in Model Rocketry - Estes! The Plasma Probe is a Skill Level 1 kit but a great choice for everyone.

Technical Specifications
Skill Level 1

Length: 18.5 in (47 cm), Diameter: 1.33 in. (34 mm), Estimated Weight: 1.7 oz. (67 g), Recovery: 12 in. (30.5 cm) Parachute

High Quality Balsa Nose Cone, Waterslide Decals, Laser cut Balsa

Recommended Engines: B6-4, C6-5

Max Altitude: 800 ft.(244 m)

Estes flying model rocket kit #3216
Super Alpha

Skill Level 1

A Super Sized Super Alpha that flies on standard Estes engines. How cool is that! Standing almost 20 inches tall, this rocket reaches heights of 600 feet.

Description
Super sized and super fun! That's what the Super Alpha is! Powered by Estes standard engines, you will reach amazing heights of 600 feet!
Technical Specifications
Skill Level 1

Length: 19.5 in. (49.5 cm), Diameter: 1.64 in. (42 mm), Weight: 2.2 oz. (62.3 g), Recovery: 18 in. (46 cm) Parachute

Laser cut Balsa Fins, High Quality Balsa Nose Cone, Waterslide Decals

Recommended Engines: B6-4, C6-5

Max Altitude: 600 ft. (183 m)

Estes flying model rocket kit #3217
Vagabond

Almost 3 feet tall and can still reach heights of 1275 feet! Now that's awesome.

Standing almost 3 feet tall, this amazing rocket can reach heights of 1275 feet. Launched on D and E engines, this rocket is sure to be a crowd pleaser.

Technical Specifications

Skill Level 2
Length: 35.25 in. (89.5 cm), Diameter: 1.64 in. (42 mm) , Estimated Weight: 4.1 oz. (116.2 g)
Laser Cut Wood Fins, Waterslide Decals, Parachute Recovery
Recommended Engines: D12-5(First Flight), D12-7, E9-6*, E9-8*
Projected Max Altitude: 1275 ft. (389 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

* E engines require an E Launch Controller and E Launch Pad and you have to be 18 to purchase E engines.

Estes flying model rocket kit #3218
Laser Lance

This impressive looking rocket floats back to earth on a preassembled 12 inch parachute. Powered by C-11 and D engines, the Laser Lance soars over 900 feet!

A new rocket to the Estes line. The Laser Lance stands over 20 inches tall and can reach heights of 925 feet! A military style missile, it's sure to be a crowd pleaser!

Technical Specifications

Skill Level 2
Length: 20.25 in. (51.4 cm)
Diameter: 1.64 in. (42 mm)
Estimated Weight: 2.8 oz. (79.4 g)
Laser Cut Wood Fins, Waterslide Decals, 12 in. (30.5 cm) Parachute Recovery
Recommended Engines: C11-3 (First Flight), C11-5, D12-5, D12-7
Projected Max Altitude: 925 ft. (282 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Estes flying model rocket kit #3219
Air Commander

Another great 2-stage rocket enters the Estes line. Powered by C11 and D Engines, amazing heights can be reached!

A sleek 2-stage sport rocket standing over 30 inches tall, the Air Commander is sure to "command" the skies! This rocket can be flown as a single stage or 2-stage and can reach heights of 2250 amazing feet.

The Air Commander flies on standard engines and a bright 18 inch parachute brings it back to earth. Prepare for re-launch with a new Estes engine, wadding, an igniter and igniter plug.

Technical Specifications

Skill Level 2
Length: 32.5 in. (82.5 cm)
Diameter: 1.33 in. (33 mm)
Estimated Weight: 3.8 oz. (107.7 g)
Waterslide Decals, Laser cut Fins, Recovery: 18 in. (46 cm) Parachute
Recommended Engines: C11-0 & C11-5 (First Flight), C11-0 & D12-5 or D12-7, D12-0 & C11-5 or C11-7 or D12-5 or D12-7. Single Stage only: C11-3 (First Flight), D12-5, D12-7

Projected Max Altitude: 2250 ft. (686 m)

Estes flying model rocket kit #3221
QCC Explorer

Special pricing for all on this kit.

Don't let the looks fool you with this Skill Level 4 kit. It may look like it's simple to build but what's under the paint will surprise you! Each simulated air intake/fin assembly is constructed from 12 interlocking laser cut balsa pieces.

IT HAS ARRIVED!

The Estes QCC Explorer is a design study on what a Hypersonic Cruise Missile may one day look like. The long slender air intakes along the body would not only supply air to the engine put provide lift while flying to its target. The kit features air intakes built up of laser cut wood and a plastic molded exhaust cone.

Technical Specifications

Skill Level 4
Length: 35 in. (88.9 cm)
Diameter: 1.64 in. (42 mm)
Estimated Weight: 5 oz. (141.2 g)
Laser Cut Wood Fins, Waterslide Decals, 18 in. (46 cm) Parachute Recovery
Recommended Engines: C11-3 (First Flight), D12-5, E9-4*, E9-6*
Projected Max Altitude: 1225 ft. (373 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

* E engines require an E Launch Controller and E Launch Pad and you have to be 18 to purchase E engines.

Estes flying scale model rocket kit #7000
Bull Pup 12D Standard Model Rocket
Estes' Explorer Series.

A sport scale version of the USAF AGM-12D Bull Pup air-to-ground missile.
Capable of flying over 800 feet (245m).
Great first scale model.
Precision parts.
Die-cut balsa fin parts.
Molded White plastic nose cone and tail.
Parachute recovery.
Plain Brown body tubes.
Authentic self-adhesive color decals.
Skill level 2 model.
Detailed illustrated assembly and launch instructions.
Requires Assembly, Igniters, Launch System, Engines: A8-3 (First Flight); B4-4, B6-4, C6-5.
Length: 15.63" (39.7cm)
Diameter: 1.325" (33.7mm)
Weight: 1.8oz (51g)

Estes flying model rocket kit #7214
Monarch

Skill Level 1

Soaring to heights of 700 feet, this sleek three fin design is great for the beginner. A straight- forward kit to build, it come with a high quality balsa nose cone and laser cut balsa fins.

Description
Another great addition to the Estes line. The Monarch is a Skill level 1 kit that definately has the beginner in mind. A simple to build kit, yet an impressive kit, the serious rocketeer will want to add to their collection.

Standing over 22 inches tall, this rocket can reach 700 feet on standard Estes engines. A preassembled 12 inch parachute returns this rocket back to earth. Repack the parachute, grab a new engine, wadding, igniter and igniter plug and you are ready to blast off again!

Technical Specifications
Skill Level 1

Length: 22.5 in. (57.1 cm), Diameter: 1.33 in. (34 mm), Weight: 2.4 oz. (68 g), Recovery: 18 in. (46 cm) Parachute

Recommended Engines: B6-4, C6-5

Max Altitude: 700 ft. (228 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, 3/16 in. Maxi Launch Rod, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Estes flying model rocket kit #7215
Stratocruiser

Skill Level 1

Cruise the Stratosphere with the new Stratorcruiser from Estes. Another great design by our superior rocket designers!

Description
A Skill Level 1 kit, the Stratocruiser looks massive but is as easy builder. Use the really cool color scheme shown or creat your own! Either way, the waterslide decals included adds a nice finishing touch on your rocket.

Launched on standard Estes Engines, this rocket can reach heights of 725 feet. A preassembled parachute makes for a soft landing. Repack the parachute, grab a new engine and you're ready for another launch!

Technical Specifications
Skill Level 1

Length: 23.5 in. (59.7 cm), Diameter: 1.33 in. (34 mm), Weight: 2.2 oz. (62.4 g), Revcovery: 12 in. (30.5 cm) Parachute

Laser cut Balsa Fins, Waterslide Decals

Recommended Engines: B6-4, C6-5

Max Altitude: 725 ft. (221 m)

Estes flying model rocket kit #7216
EPM-010

Another great high performance sport rocket from Estes! Standard engines, 925 feet, what more do you need!

The EPM-010 features swept forward fins with outer navigational pods for interplanetary space travel. Its long slender design will reward you with straight, outta-site flights. This hot looking rocket floats back to earth on a preassembled 12 inch parachute. Standard Engine powered, the EPM-010 soars over 900 feet!

Technical Specifications

Skill Level 2
Length: 35.25 in. (89.5 cm)
Diameter: .98 in. (25 mm)
Estimated Weight: 2.4 oz. (68 g)
Laser Cut Wood Fins, Waterslide Decals, 12 in. (30.5 cm) Parachute Recovery
Recommended Engines: B4-4, B6-4 (First Flight), C6-3, C6-5
Projected Max Altitude: 925 ft. (282 m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Sunward Aerospace flying scale model rocket kit #4
Moondance Model Rocket kit

The rocket comes with instructions written in both English & French. They are very clear and anybody who's built an Estes level 1 kit (e.g. Big Bertha) would have no problem in assembling this kit. The components are all of exceptional quality but not the usual "run of the mill" components found in most kits nowadays. The Engine Centering Rings are much bulkier than usual. The Engine Hook is a threaded L-shaped piece of metal rather like a simple domestic picture hook. The Nose cone is made of High Density Polyethylene and the parachute is made of a much higher quality plastic than the usual "Happy Shopper carrier bag" plastic chutes.

Awesome Flight Performance
High Quality Laser Cut Balsa
Safe 18" parachute recovery
Length 24 1/2" 62cm
Diameter 1.3" 3cm
Recommended engines: B6-2(first flight),
B6-4, C5-3, C6-5, and C6-7
Instructions
Decals
Skill Level 2

Sunward Aerospace flying scale model rocket kit #14
Rocket Motor Powered Boost Glider kit

The Sunward Company markets an interesting line of rocket kits with a special focus on fighter plane designs.

High Quality Laser Cut Balsa - Competition grade with spruce boom
Length - Pod and Glider 14" / 35cm
Glider Wingspan 14" / 35cm
Recommended engines: A2-2(first flight), A8-3, B4-2, B6-2
Instructions
Decals
pod uses streamer recovery
Skill Level 5 - for the experience modeller

please note: no engines are included in this kit.

Sunward Aerospace flying scale model rocket kit #17
Galactic Wave Model Rocket kit

The Sunward Company markets an interesting line of rocket kits with a special focus on fighter plane designs.

High Quality Laser Cut Balsa
Safe 18" parachute recovery
Length 22 " / 56cm
Wingspan 9" / 23cm
Recommended engines: B6-2(first flight), C6-3
Instructions
Decals
Skill Level 3
please note: engines not included

Sunward Aerospace flying scale model rocket kit #18
Shoot the Moon Model Rocket Kit

Inspired by the Canadair Cl-289 airborne surveillance system
High Quality Laser Cut Balsa
Safe 18" parachute recovery
Length 30" / 76cm
Wingspan 6" / 15cm
Recommended engines: B4-2(first flight), B6-4, and C6-5
Instructions
Decals
Skill Level 3
please note: engines not included

Sunward Aerospace flying scale model rocket kit #20
Khufu's Pyramid Flying Rocket kit

Over 6"/ 15cm high
4 sided, Base of 5 1/4"/ 13cm
High Quality Laser Cut Balsa and Engine mounting Plates
Safe 18" Parachute Recovery and streamer engine mount recovery
full instructions
Recommended engine: C11-3 (first Flight), D12-3, E15-4
Skill Level 4
Not to scale or to any historical records.

please note: engines not included

Sunward Aerospace flying scale model rocket kit #21
Flying Umbrella Model Rocket Kit

Over 14"/36cm high
Over 13"/33cm wide
Low altitude flyer- perfect for showing Terminal Velocity
High Quality Laser Cut Balsa
Safe 18" Parachute recovery
Full instructions
Recommended Engines: D12-3
Skill Level 3

please note: no engines are included in this kit.

Sunward Aerospace flying scale model rocket kit #22
King Tut's Pyramid Flying Model Rocket

Over 9"/ 23cm high 4 sided,
base of 9"/ 23cm
High Quality Laser Cut Balsa and Engine Mounting Plates
Safe 18" Parachute Recovery and streamer engine mount recovery
Full instructions
Recommended Engine: F25-5, F50-4, G 35-4, G40-4
Skill Level 4
Not to scale or to any historical records.

please note: no engines are included in this kit.

Sunward Aerospace flying scale model rocket kit #24
Mercury Lander Jr. Model Rocket

Flights of 900feet / 275m
Width of 7 1/2" / 19cm
Diameter 1.637" / 42mm
Length 14" / 36cm
High Quality 4 Fin Laser Cut Balsa
Includes 4 sets of Lander legs and Bases
Includes motor retaining clip
Safe 18" parachute recovery
Recommended engines: A8-3, B4-2 (first flight), B4-4, B6-2, B6-4, B6-6, C6-3, C6-5, C6-7
Instructions
Designed by Tim MacLeod
Skill Level 2

Engine Approximate Altitude
A 150' / 45m, B 375' / 120m, C 900' / 275m

Sunward Aerospace flying scale model rocket kit #0026
The Solar Eclipse 2 Stage w/Booster

2 Stage Model Rocket Kit with Booster
Skill Level 3 - requires friction fit of motors.

Flights of 1350feet / 425 m
Precision FACTORY Precut Main Body Tubes and Booster Section
Diameter 2.217" / 56mm
Length over 44" / 110cm
High Quality EIGHT (8) Fin Laser Cut Balsa - 2 sets of FOUR (4)
Includes laser cut lite-ply mounting rings
Safe 24" nylon parachute recovery
Includes Self Adhesive Decal
Great 2 stage kits with stable flight

Recommended engines:
Fly as single stage:
D12-3, D12-5, E9-8
Fly as Two Stage
D12-0, C11-7
D12-0, D12-7
D12-0, E9-8

Engines Approximate Altitude:
Single Stage
D 525' / 160m
E9-8 925' / 275m
TWO Stage
D12-0, C11-7 700' / 200m
D12-0, D12-7 1000' / 300m
D12-0, E9-8 1350' / 425m

To build and launch this kit, you will also need (not included):
Recovery Wadding - or use Sunward™ BT70 Baffle or Sunward NOMEX 9x9" Fire Resistant Blanket - best to install when building.
Small tools
Sandpaper
Sealer and paints
White glue
Launch Pad and Launch Controller
Rocket Engines
Igniters

Sunward Aerospace flying scale model rocket kit #29
Interplanetary Shuttle

Flights of 1000feet / 300m
Wingspan 5 1/4" / 13 cm
Over 11"/ 28cm high
High Quality Laser Cut 4 Balsa Fins
Distinctive Design
Body Tube Diameter: 0.976" / 24mm
Safe parachute recovery
Recommended engines: A8-3, A8-5, B4-2(first flight), B4-4, B6-2, B6-4, B6-6, C5-3, C6-3, C6-5, C6-7
Instructions
Skill Level 2

please note: no engines are included in this kit.

Sunward Aerospace flying scale model rocket kit #36
Box Racer

Flights of 500 feet / 175m
Safe parachute recovery
Preprinted side panels: just glue on to foam boards
includes motor retaining clip
Body Tube Diameter: 0.976" / 24mm
Over 19" tall
Recommended engines: B4-2(first flight),
B6-4, C6-3
Instructions
Skill Level 2

please note: no engines are included in this kit.

Sunward Aerospace flying scale model rocket kit #0038
The SkyBender TRIPLE motor Model Rocket

TRIPLE motor cluster with distinctive body structure

Flights of 1600feet / 500m
Precut Main Body Tubes
Finspan 9 1/2" / 24cm
Diameter 1.637" / 42mm
Length over 33" / 83cm
High Quality FIVE (5) Fin Laser Cut Balsa
Includes laser cut lite-ply mounting rings and 3 metal motor retaining clips.
Safe 18" parachute recovery
Includes Self Adhesive Decal
Great Cluster kit
Recommended engines: THREE of A8-3, A8-5, B4-4 (first flight), B6-4, B6-6, C6-3, C6-5, C6-7 ( not designed to launch with one motor)
Instructions
Skill Level 3

Engine Approximate
Altitude
TRIPLE A 525' / 160m
TRIPLE B 750' / 225m
TRIPLE C 1600' / 500m

To build and launch this kit, you will also need (not included):
Recovery Wadding - or use Sunward™ BT60 Baffle or Sunward NOMEX 9x9" Fire Resistant Blanket - best to install when building.
Small tools
Sandpaper
Sealer and paints
White glue
Launch Pad and Launch Controller
Rocket Engines
Igniters

Sunward Aerospace flying scale model rocket kit #39
Flechette Dart Flying Model Rocket

Flights of 1000 feet / 300m
High Quality Laser Cut Balsa
Safe 18" parachute recovery
Quality Nose Cone
Body Tube diameter: 0.976" / 24mm
Recommended engines: A8-3, B6-4(first flight), C6-3, C6-5
Instructions
Skill Level 2

Flechette The word flechette is French for "dart." In military use, it is a projectile having the form of a small metal dart: a sharp-pointed tip and a tail with several vanes to stabilize it during flight

please note: no engines are included in this kit.

Sunward Aerospace flying scale model rocket kit #41
Explorer Model Rocket Kit

Flights of 800 feet / 250m
High Quality Laser Cut Balsa
Distinctive Design
Safe 18" parachute recovery
Body Tube Diameter: 0.976" / 24mm
Recommended engines: B4-2, B4-4, B6-2, B6-4(first flight), C6-3, C6-5
Instructions
Skill Level 2

please note: no engines are included in this kit.

Sunward Aerospace flying scale model rocket kit #43
Lightning Fury Model Rocket

Flights of 1400feet / 425m
Wingspan 31/2" / 9cm
Length 21" / 53cm
High Quality Laser Cut Balsa
Safe 18" parachute recovery
Body Tube Diameter: 0.976" / 24mm
Great beginner's kit
Recommended engines: A8-3, A8-5, B4-2, B4-4, B6-4 (first flight), B6-6, C6-3, C6-5, C6-7
Instructions
Skill Level 1

please note: no engines are included in this kit.

Sunward Aerospace flying scale model rocket kit #44
Grasshopper Model Rocket Kit

Great rocket to fly - easy to build, fun to fly, great time finding!
Flights of 1500feet / 450m
Fin Span 5 1/2" / 14cm
Diameter 0.976" / 25mm
Height 10" / 25cm
High Quality 3 Fin Laser Cut Balsa
Includes motor retaining clip
Streamer Recovery
Recommended engines: A8-5, B4-4 (first flight), B6-4, C6-5, C6-7
Instructions
Skill Level 1

Engine Approximate
Altitude
A 400' / 125m
B 800' / 250m
C 1500' / 450m

To build and launch this kit, you will also need (not included):
Recovery Wadding - or use Sunward BT50 Baffle or Sunward NOMEX 3x3" Fire Resistant Blanket - best to install when building.
Small tools
Sandpaper
Sealer and paints
White glue
Launch Pad and Launch Controller
Rocket Engines
Igniters
Rocksim File for the Grasshopper Model Rocket Kit.
Please note all Rocksim files are provided as a courtesy and are not meant to be 100% accurate - errors do exist. All rockets must be tested for stability prior to launch.

Recommended for ages 10 and up - adult supervision required for ages 10-16

Sunward Aerospace flying scale model rocket kit #45
Flat Foot Model Rocket Kit

Flights of 800feet / 250m
Diameter 0.976" / 25mm
Height 21" / 53cm
Fin Span: LARGE 12 1/2" / 32cm - the highest width to height ratio for any BT50 based model rocket kit.
Includes Decal for name and 8 sets of Toes!
High Quality FOUR (4) Laser Cut Balsa Fins
Includes motor retaining clip
Safe 18" Parachute Recovery
Recommended engines:A8-3,A 8-5, B4-4 (first flight), B6-4, C6-3, C6-5, C6-7
Instructions
Skill Level 2

Engine Approximate
Altitude
A 200' / 60m
B 400' / 125m
C 800' / 250m

Sunward Aerospace flying scale model rocket kit #47
Arachnid 8 Fin Flying Rocket

Flights of 1050feet / 325m
Finspan 5 1/2" / 14cm
Diameter 1.637" / 42mm
Length 21" / 53cm
High Quality EIGHT (8) Fin Laser Cut Balsa
Includes laser cut lite-ply mounting rings and metal motor retaining clip
Safe 18" parachute recovery
Great Stable Rocket Kit
Recommended engines: 2 WAYS to Build:
A8-3, B4-2, B4-4 (first flight), B6-2, B6-4, B6-6, C6-3, C6-5, C6-7 or C11-3, C11-5, C11-7, D12-3, D12-5, D12-7
Instructions
Skill Level 2
Designed by Tim MacLeod

Engine Approximate Altitude
A 100' / 30m, B 300' / 90m, C 18mm 650' / 200m, C/D 24mm 1050' / 325m

Sunward Aerospace flying scale model rocket kit #48
Daddy Long Legs Model Rocket Kit

Flights of 850feet / 240m
Diameter 0.976" / 25mm
Height 27" / 68cm
Includes Decal
High Quality Laser Cut Balsa Fins and Ribs
Includes motor retaining clip
Safe 18" Parachute Recovery
Recommended engines: B4-4 (first flight), B6-4, C6-5, C6-7
Designed by Tim MacLeod
Instructions
Skill Level 2

Engine Approximate Altitude
B 300' / 90m
C 850' / 240m

Sunward Aerospace flying scale model rocket kit #93
CFX-3 Model Rocket

Flights of 700 feet / 214 m
High Quality Laser Cut Balsa
Safe 18" parachute recovery
Great beginner's kit
Popular with clubs and schools
Recommended engines: B4-4(first flight), B6-4, C6-5, C6-7
Instructions
Decals
Skill Level 2
Includes decal
2 colour
Silkscreen decal - perfect for outdoor use, strong mylar

note: no engines are included